A kitchen extension, a finished basement, a new dryer circuit, a panel that has to carry more than it was sized for - these jobs go smoother when the electrical side is thought through before the drywall goes up or the appliance gets delivered. We handle that planning work as readily as we handle the repair call. Whether you are getting a room ready for new lighting, adding circuits ahead of a renovation, or figuring out what the panel needs before a major appliance arrives, calling early in the process saves time and avoids the kind of rework that happens when wiring gets done after the fact.
We serve Severn and the surrounding communities in Anne Arundel County for the full range of residential and commercial electrical work. Homeowners planning ahead, property managers keeping rental units up to code, and small businesses fitting out a new space all call us for the same reason: they want the electrical side handled correctly from the start. We take calls every day from 7:30 AM to 9:30 PM.
Call (667) 442-8789 to talk through what the job involves and get a price before anything is scheduled.
When you call, we talk through what the job involves before anything is confirmed. That conversation covers the scope, the price, and what to expect on the day. You are not committed to anything until you have heard what the work covers and what it costs. The price is confirmed before we schedule, so there are no decisions made under pressure once someone is already at the property.
We are available every day from 7:30 AM to 9:30 PM. For urgent faults, ask about short-notice availability when you call. For larger jobs, most can be scheduled within a reasonable window, and we will tell you honestly what the calendar looks like for the type of work you need.
A rental unit that needs GFCI corrections before a new tenant moves in, a retail space that cannot shut down a whole circuit during business hours, a property manager coordinating work across several addresses at once - these are not unusual requests. We scope the job on the call, confirm what access is needed, and work out an approach that keeps disruption to a minimum. If a circuit needs to be off for part of the job, we tell you in advance how long to expect that, so the property can plan around it.
On any renovation or build-out that involves opening walls, the electrical rough-in has to happen before insulation and drywall. That is not a preference, it is the order the work demands. New circuits, outlet and switch rough-ins, recessed lighting cans, and the wiring for a ceiling fan where there is currently no box in the ceiling all need to be in place before the walls close. Scheduling the electrician after the finishers means opening things back up, and that costs more than getting the order right the first time.
We fit into the renovation sequence at the right point. For homeowners in Severn working with a general contractor, we coordinate directly on timing so the electrical work does not hold up the rest of the build. For projects being managed by the homeowner, we explain clearly what needs to happen before and after our visit, so nothing gets closed in before it should be.
The same logic applies to panel work on a renovation. If the project adds a new kitchen circuit, a dedicated line for a washer or dryer, or a circuit for heating or cooling equipment, the panel capacity question needs an answer before the rough-in starts, not after. We check available capacity on the call and flag any upgrade work before it becomes a problem mid-project.
Electrical work is priced by what the job actually involves, and the clearest way to get an accurate number is to describe the situation on the call. A targeted repair to a single circuit is a different scope from a panel replacement, and a ceiling fan installation where the wiring is already there is a different job from one that requires running a new circuit from the panel.
Three things move a quote in either direction. The first is what the fault turns out to be once it is properly traced, because some problems look minor from the outside and turn out to involve more of the circuit than the visible symptom suggested. The second is what has to be opened up to reach the work, because accessible wiring in a finished basement is a different situation from the same circuit running through a finished ceiling. The third is whether the existing panel can carry the change without an upgrade.
None of those are surprises if they are discussed on the call. We go through the likely scope when you call, give you a rate that covers what we know, and tell you what would change it if we find something different on-site. Nothing is added to the job without your agreement. Code-compliant wiring on every job means the finished work holds up to inspection, and the scope of the electrical work is priced before it starts. The process is written out on the services page covering electrical work.
Older homes in this part of Anne Arundel County were built in different eras and fitted out with different devices, panels, and wiring types. When a repair or upgrade involves replacing a device, we match the replacement to what the circuit and the installation actually need, not just to what is on the shelf. A GFCI outlet on a 15-amp circuit needs the right amperage rating. A replacement breaker has to match the panel manufacturer and the slot type. Getting that right the first time matters for safety and for code.
Some components for older panels are no longer in standard stock. If a breaker slot is for a panel brand that has been discontinued, or if a fixture or device requires a part that is not commonly stocked, we tell you on the call rather than arriving and discovering it at the property. In those cases, the options are to order the part and schedule a return visit, or to assess whether a broader replacement is the more practical path. We lay out both options and let you decide. Honest recommendations on repairs, never an upsell.
A ceiling fan where no wiring currently exists in the ceiling requires a new circuit run from the panel and a properly rated ceiling box before the fan itself goes in. A replacement on an existing box is a simpler job, but the box still needs to be rated for a fan's weight and movement, not just for a light fixture. We confirm the box type and the circuit capacity before the installation, so the fan runs correctly and safely from day one.
Ungrounded outlets are common in homes built before the 1970s. The correction options depend on the circuit: running a full ground back to the panel, or installing GFCI protection and labeling the outlets correctly per code. We assess the circuit and explain the options. Bonding corrections, which address the connection between metal components and the grounding system, come up most often during panel work or when an inspection identifies a gap.
Recessed lighting is one of the more common requests on renovation projects, and the time to run the wiring is before the ceiling is finished. LED retrofits on existing fixtures are a simpler job that can be done without opening the ceiling. Either way, we look at the circuit load before adding fixtures, because a circuit that is already near its limit needs attention before more devices go on it.
Knob-and-tube wiring is present in a significant share of older homes across this region, and Severn has its share of them. The system has no ground wire, no capacity for modern household loads, and creates complications for homeowners seeking insurance or preparing to sell. We map the affected circuits during an inspection, explain the scope of the replacement, and handle the work in stages where the whole house cannot be opened at once. Aluminum branch-circuit wiring from the 1960s and 1970s is a related concern, addressed at the termination points where the connections loosen over time.
Hardwired alarms with battery backup are required in most residential installations and offer more reliable protection than battery-only units. We install interconnected systems so that when one alarm triggers, every alarm in the house sounds. Replacing an older system or adding alarms to meet current code is a straightforward job that is often combined with other electrical work already scheduled.
A panel that buzzes, runs warm, or has breakers that will not hold their position has reached or exceeded its design capacity. We assess the load, calculate what the service needs to carry, and handle the replacement as a complete job, including any subpanel work and the reconnection of branch circuits. An EV charger or a hot tub often means checking the panel first, because both require dedicated circuits the existing service may not have capacity for without an upgrade.
Most lighting questions come down to two things: whether the circuit can carry the change, and whether the timing is right. Adding recessed lights to a room that is about to be repainted is the obvious moment to do it. Adding exterior security lighting while a new outlet is being run to the garage saves a second visit. We point that out when it comes up on the call, because combining work that would otherwise require two separate visits is a straightforward way to get more done at a lower total cost.
For outdoor lighting, the conversation usually starts with visibility and security. Motion-sensor fixtures at entry points, driveway lighting, and soffit-mounted security lights are all common requests. We look at where the nearest circuit is, whether it has capacity, and what the best route for the wiring is before giving a price. Inside, under-cabinet lighting in kitchens and dimmer-switch upgrades in living areas come up regularly. Both are jobs that can be combined with other work or scheduled on their own.
We cover Severn and the surrounding communities throughout Anne Arundel County. That includes Fort Meade, Gambrills, Jessup, Odenton, and Elkridge. If your address is in the area and you are not sure whether it falls within our range, call and ask. We will confirm coverage on the call and get you scheduled if it works.
A workshop typically needs 240-volt circuits for larger power tools, dedicated circuits for equipment that draws significant current, and adequate lighting for the work being done. The specific circuit layout depends on what equipment you are running and whether any of it requires a dedicated circuit. We discuss the tool list and the layout when we scope the job.
It helps considerably. A fault that happens only when the dishwasher and the microwave run at the same time tells us something different from one that happens randomly at any hour. Noting the time, what else was running, and whether the breaker tripped or just the outlet went dead gives us a much clearer starting point on the call.
We do. Debris from the job, wire offcuts, packaging, and anything else that came out of the work area gets cleared before we leave. If the job involved cutting into drywall or plaster, we will tell you on the call what to expect in terms of patching, because that varies by job.
Older panels sometimes use breakers that are no longer in standard production. We assess whether a compatible replacement is available, whether the panel itself needs to be replaced, or whether the circuit can be safely addressed another way. We do not install a breaker that is not rated for the panel it goes into, and we explain the options clearly before recommending a path.
The electrical rough-in needs to happen before insulation and drywall close the walls. If the project involves new circuits, recessed lighting, outlet rough-ins, or a ceiling fan where no wiring currently exists, those need to be in place before the finishers arrive. For panel capacity questions related to the renovation, those are worth answering before the rough-in starts, not after.
We cover Severn and the surrounding communities in Anne Arundel County, including Gambrills, Odenton, Fort Meade, Jessup, and Elkridge.
If you are unsure whether your address is in the area, call (667) 442-8789 and we will confirm on the call.
Yes. If life-sustaining or medically necessary equipment is in use, we need to know before we schedule any work that affects those circuits. We plan the shutdown sequence to avoid interrupting power to that equipment, and we discuss the plan with you in advance so nothing is left to chance on the day.
Call (667) 442-8789 to get a quote and find out what the schedule looks like.
We take calls every day from 7:30 AM to 9:30 PM. The scope of the electrical work is priced before it starts, and you get honest recommendations on repairs, never an upsell. Dependable service. A price agreed before we start. Local know-how.
We are also in: Glen Burnie, Pasadena, Severna Park, Catonsville, Columbia.
We handle the full range of residential and commercial electrical work in Severn and across Anne Arundel County, from a single tripped breaker to a complete panel replacement. Every job starts with a conversation about what the work involves and what it will cost, before anything is scheduled. The table below covers the services we offer most often in this area, who each one fits, and what is worth knowing before you call.
| Service | What the Job Involves | Common Situations | What to Keep in Mind |
|---|---|---|---|
| Electrical Panel & Service UpgradesMost Popular |
| Older homes adding EV chargers, home offices, or major appliances to an undersized service | Many Severn-area homes were originally wired for 60 or 100 amps. A service upgrade is often the first step before any large new circuit can be safely added. |
| Ceiling Fan Installation |
| Rooms with an existing fixture box or where a new circuit needs to be run | A standard light box is not rated for a ceiling fan. We confirm the box type before installation and replace it if needed. |
| Electrical Safety Inspections |
| Home sales, housing inspection responses, and older properties that have not been assessed recently | An inspection documents what is there and what needs attention, which is useful when preparing a property for sale or responding to a code finding. |
Call (667) 442-8789 to talk through what the job involves and get a price before anything is scheduled.
(667) 442-8789