Essex Electrical Company serves homeowners, landlords, property managers, and businesses throughout Essex and the broader Baltimore County area. Whether you need a single outlet replaced or a full-panel upgrade for a commercial property, we handle residential and commercial electrical work from the first call through to the finished job. Dependable service. A price agreed before we start. Local know-how. The scope of the electrical work is priced before it starts, so you know what you are getting into before anyone shows up at your door.
Call (667) 442-8789 for a quote.
Electrical problems don't wait, and neither do we, whether the issue is a flickering light, a dead outlet, a breaker that keeps tripping, or a burning smell coming from a switch plate. These symptoms range from minor nuisances to early signs of something more serious, and the difference is not always obvious from the outside. We diagnose the source, explain what we found, and give you honest recommendations on repairs, never an upsell.
Our troubleshooting work covers GFCI and AFCI protection, grounding and bonding problems, partial power loss, and sparking outlets or switches. We work in homes, rental units, and commercial spaces alike. A retail space with a dead circuit and a row house with a tripping breaker get the same careful attention. We'll trace it, fix it, and test it before we leave.
Older panels, added square footage, a new appliance pulling more load than the existing service can handle - any of these can push a panel past what it was designed for. We handle breaker panel replacement, 200-amp panel upgrades, service entrance and meter upgrades, subpanel installation, and load calculations to make sure the supply matches the demand.
A panel inspection is part of the process. We look at what is there, what it is feeding, and whether the current setup meets code before we recommend a path forward. Code-compliant wiring on every job means the work holds up to inspection and gives you a system you can build on. We'll sort the wiring and clean up after.
Most homeowners can't tell a minor wiring issue from a serious one, and that uncertainty is exactly why a straightforward outlet or switch job is worth doing right. We install and replace standard outlets, GFCI outlets, AFCI outlets, USB outlets, dimmer switches, and light switches. If an outlet feels warm to the touch or a switch is slow to respond, that is worth a look before it becomes a larger problem.
Lighting is a natural extension of that work. We handle recessed lighting installation, LED retrofits, under-cabinet lighting, light fixture replacement, security lighting, motion sensor lights, and outdoor and landscape lighting. Exterior lighting in particular does double duty: it improves visibility and adds a layer of security around the property.
Ceiling fan installation and replacement fall in this category too. A fan with no existing wiring in the ceiling requires running a new circuit, which we handle as part of the installation. We're ready to get your circuits working again.
Don't let a small wiring issue turn into a fire risk, because older wiring problems rarely stay small. We handle whole-home rewiring, partial rewiring, and dedicated circuit installation for dryers, ovens, refrigerators, dishwashers, and the supply side of air conditioning and heating equipment. A 240-volt outlet for a new appliance or a dedicated 20-amp circuit for a refrigerator are jobs we schedule regularly.
Whole-home surge protection is worth adding when wiring work is already underway. A single surge event can damage appliances, electronics, and the wiring itself. Installing a whole-home surge protector at the panel is a straightforward addition that protects everything downstream. We'll confirm what the job involves and what it covers before we schedule anything.
The electrical needs of a single-family home, a rental property, and a commercial space are different in scope but not in the standard of work they deserve. Built for homeowners. Ready for property managers. Ready for your panel. We work with landlords managing a handful of units and property managers overseeing larger portfolios, handling code-correction wiring, outlet upgrades, lighting installations, and panel work across multiple addresses.
Commercial clients - offices, retail spaces, and new businesses getting set up - need electrical work that meets code and does not slow down operations. We scope the job on the call, confirm what the work involves, and schedule around what the property needs. An EV charger or a hot tub often means checking the panel first, and that panel check is part of what we do before any installation begins. We'll take care of it from the assessment through to the finished circuit.
Essex sits in a part of Baltimore County where the housing stock runs old. Row houses, Cape Cods, and post-war ranchers make up a large share of the residential landscape, and the electrical systems inside many of them have not kept pace with modern demand. Add mid-Atlantic winters that bring ice storms and nor'easters, and a high regional rate of EV adoption, and three services come up again and again in this area.
Knob-and-tube wiring was standard in homes built before the 1950s, and aluminum branch wiring was widely installed through the 1960s and 1970s. Both are common in Essex and the surrounding county. Neither is compatible with the load demands of a modern household, and both create complications for homeowners seeking insurance coverage or trying to sell a property.
We identify the wiring type during an inspection, map out the scope of what needs to be replaced, and restore the affected circuits to current standards. The work is done in sections where possible to minimize disruption. Code-compliant wiring on every job means the finished work meets what the local inspectors require.
Maryland has one of the highest rates of EV adoption in the country, and Level 2 home charging has become a practical necessity for most EV owners. A Level 2 charger cuts charging time significantly compared to a standard 120-volt outlet, and it requires a dedicated 240-volt circuit.
Before any charger goes in, we assess the panel to confirm it has the capacity to support the added load. If an upgrade is needed first, we handle that as part of the project. The installation covers running the dedicated circuit, installing the outlet or hardwired unit, and confirming the charger is drawing correctly before we finish.
Power outages in the Baltimore area are not rare events. A serious nor'easter or an ice storm can take out power for days, and summer storms are unpredictable enough that a reliable backup is worth planning for. We handle the electrical side of generator hookups: the transfer switch installation, the wiring from the generator to the panel, and the load assessment to confirm what the generator can carry.
A properly wired transfer switch is what separates a safe generator hookup from a dangerous one. It isolates the home's circuits from the utility line during an outage, protecting both the household and utility workers. The wiring is done to code, and we walk through what the system covers before the job is complete.
The hardest part of an electrical problem is knowing when to call, and for many homeowners the answer is before the problem becomes visible. An electrical safety inspection is the right move for anyone buying an older home, preparing a property for sale, managing a rental that has not been looked at in years, or simply living in a house where the wiring predates the current owners.
We inspect the panel, the branch circuits, the grounding system, and the outlets and switches throughout the property. Arc-fault and ground-fault breaker coverage is part of what we check. The inspection gives you a clear picture of what is there, what meets current standards, and what needs attention. Landlords and property managers use these inspections to stay ahead of code issues before a tenant or an inspector finds them first.
Electrical work cost is one of the first questions callers ask, and it is a fair one. When you call, we go through what the job involves and give you a rate on the phone before anything is scheduled. You are told what the price covers so you can decide whether to move forward. The scope of the electrical work is priced before it starts, and there is no pressure to commit on the spot.
We are available every day from 7:30 AM to 9:30 PM. Most jobs in the area can be scheduled within a reasonable window, and we take short-notice calls when the schedule allows.
Call (667) 442-8789 to get a price and find out what the schedule looks like.
Essex is the center of our service area, and we work throughout Baltimore County and the communities around it. That includes Middle River, White Marsh, Rosedale, Dundalk, Parkville, and Edgemere, among others nearby. Whether the property is a row house a few blocks from the water or a commercial space farther into the county, the work is handled the same way.
If you are not sure whether your address falls in the area, call and ask. We will confirm what we can cover and get you scheduled if it works.
When you call, we go through what the job involves and give you a rate on the phone before anything is scheduled. The scope of the electrical work is priced before it starts, so you know what you are agreeing to and what it covers. If the scope changes once we are on-site, that gets discussed before the work continues, not after.
We take calls every day from 7:30 AM to 9:30 PM, including Saturdays and Sundays.
If something goes wrong on a weekend and you cannot wait until Monday, call (667) 442-8789 and we will confirm what the schedule allows.
Evening availability within those hours is worth asking about when you call.
A useful starting point is a description of what you are seeing: which outlet, switch, or fixture is affected, whether the problem is constant or intermittent, and whether the breaker has tripped. For larger jobs like a panel upgrade or rewiring, knowing the age of the home and the current panel size helps us give you a more accurate range on the call. The more detail you can share, the more specific the quote.
You call, describe what is happening, and we give you a price and a scope before anything is booked. When we arrive, we diagnose the fault or assess the installation, confirm the plan with you, and do the work. We test everything before we leave and walk you through what was done.
We work with landlords managing a handful of units and property managers overseeing larger portfolios across Essex and Baltimore County. That work typically covers outlet upgrades, GFCI compliance, panel condition, code-correction wiring, and lighting installations across multiple addresses.
Call (667) 442-8789 to discuss what the properties need and how to get them scheduled.
The most common reason is a scope change discovered once we are on-site, such as wiring that is in worse condition than it appeared or a panel that needs attention before a new circuit can be added safely. If something changes the scope, we discuss it with you before continuing. Nothing is added to the job without your agreement.
Panel size and home size both affect the scope of certain jobs, particularly service upgrades and whole-home rewiring, because larger homes and larger panels involve more material and more time. For a straightforward repair or a single outlet installation, the size of the home is rarely a factor. The clearest way to get an accurate number is to describe the job on the call.
For most circuit-level work, the affected circuit is de-energized while we work on it. The rest of the home typically stays on. For panel work, service-entrance work, or a service upgrade, the main power to the home will be off for part of the job, and we will tell you in advance how long to expect that.
Clear access to the panel and to the outlets, switches, or fixtures being worked on makes the job go faster. If furniture is in front of an outlet or boxes are stacked in front of the panel, moving them before the visit helps. We will let you know on the call if there is anything specific to prepare for the job.
Lead times vary by the type of job and the current schedule. For urgent faults, ask about short-notice availability when you call. Larger jobs like panel upgrades or whole-home rewiring are typically scheduled a few days out.
Call (667) 442-8789 and we will tell you what the schedule looks like for your job.
Essex Electrical Company handles electrical repairs, panel upgrades, wiring, EV charger installation, generator hookups, and everything in between for homeowners, landlords, property managers, and businesses throughout Essex and Baltimore County. Dependable service. A price agreed before we start. Local know-how.
Call (667) 442-8789 to request a quote or schedule a service call. We are available every day from 7:30 AM to 9:30 PM.
We handle the full range of residential and commercial electrical work in Essex and across Baltimore County, from a single tripped breaker to a complete panel replacement. Every job starts with a conversation about what the work involves and what it will cost, before anything is scheduled. The table below covers the services we offer most often in this area, who each one fits, and what is worth knowing before you call.
| Service | What the Job Involves | Common Situations | What to Keep in Mind |
|---|---|---|---|
| EV Charger Installation |
| Essex homeowners commuting into Baltimore who need a Level 2 charger that can fully charge overnight | The panel assessment comes first. We calculate the load and confirm whether the existing service can support the circuit before any installation is scheduled. |
| Electrical Panel & Service UpgradesMost Popular |
| Older homes adding EV chargers, home offices, or major appliances to an undersized service | Many Essex-area homes were originally wired for 60 or 100 amps. A service upgrade is often the first step before any large new circuit can be safely added. |
| Dedicated Appliance Circuits |
| Any appliance that draws enough current to cause nuisance trips on a shared circuit | We check panel capacity before running any new dedicated circuit and scope an upgrade if the service cannot support the added load. |
| Ceiling Fan Installation |
| Rooms with an existing fixture box or where a new circuit needs to be run | A standard light box is not rated for a ceiling fan. We confirm the box type before installation and replace it if needed. |
| Knob-and-Tube & Aluminum Rewiring |
| Essex-area homes built before the 1970s that still carry original branch-circuit wiring | The issue with aluminum wiring is at the connection points, not the wire itself. Remediation covers every termination, not just the outlets already showing symptoms. |
| Whole-Home Surge Protection |
| Homes with sensitive electronics or anyone scheduling panel work who wants downstream protection | A single surge event can take out appliances, electronics, and HVAC controls at once. Installing a suppressor at the panel protects everything on the service. |
| Electrical Repairs & Troubleshooting |
| Any home or business with flickering lights, dead outlets, or unexplained breaker trips | A symptom that seems minor often points to a connection issue deeper in the circuit. We test before we replace anything. |
| Electrical Safety Inspections |
| Home sales, housing inspection responses, and older properties that have not been assessed recently | An inspection documents what is there and what needs attention, which is useful when preparing a property for sale or responding to a code finding. |
| Breaker & Fuse Repair |
| Homes where breakers trip under normal loads or will not hold their position | A breaker that trips repeatedly is telling you something about the circuit load or a fault condition, not just a nuisance to reset. |
| Lighting Installation |
| Homeowners updating interior lighting or adding outdoor security coverage | Lighting work can often be combined with outlet or switch upgrades on the same visit when the circuits are nearby. |
| Wiring & Circuit Installation |
| Renovations, additions, or homes where the original wiring has reached the end of its useful life | Rewiring in stages is an option when a home cannot be fully opened at once. We start with the circuits that present the most risk. |
| Backup Generator Installation |
| Baltimore County households that lose power during nor'easters or ice storms and need a safe way to run a generator | The transfer switch is what makes a generator safe to run. It isolates the home from the utility grid before the generator comes online, protecting both the equipment and utility workers. |
| Outlet & Switch Installation |
| Kitchens, bathrooms, garages, and exterior locations requiring code-required protection | GFCI protection is code-required in most wet and outdoor locations. We confirm what applies at your address before the work starts. |
Call (667) 442-8789 to talk through what the job involves and get a price before anything is scheduled.
(667) 442-8789